[Contents]
[Prev]
[Next]
[Index]
[Report an Error]
set extcommunity
Syntax
set extcommunity
{ rt extCommValue [ extCommValue ]* [ additive ] } | { soo extCommValue }
no set extcommunity
Release Information
Command introduced before JUNOSe Release
7.1.0.
Description
Sets the BGP extended communities attribute. The no version removes the set clause from a route map.
Options
- rt—Specifies a route-target extended community,
which consists of one or more routers that can receive a set of routes
advertised by BGP that carry the extended-community attribute
- soo—Specifies a site-of-origin extended community,
which consists of one or more routers that inject into BGP a set of
routes that carry the extended-community attribute
-
extCommValue—Number identifying
the extended community in one of the following formats:
-
AS:nn—Autonomous
system number, in the range 1–65535, followed by an integer
in the range 1–4294967295; for example, 320:72358
-
AS:nn—Autonomous
system number, in the range 1–4294967295 followed by an integer
in the range 1–65535; for example, 84511:45
-
ipAddress:nn—Dotted decimal IP address followed by an integer in the range
1–65535; for example, 10.10.21.5:1256
- *—Indicates that one or more parameters can be repeated
multiple times in a list in the command line
- additive—Adds the specified extended communities
to any previously configured for the attribute; if omitted, the specified
extended communities replace any previously configured for the attribute
Route Map Configuration
[Contents]
[Prev]
[Next]
[Index]
[Report an Error]
